Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If windows with double glazed window repairs panes are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall on the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the distance between the window repairs near me and the door is significant, you may need to consider an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen. Often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and do a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the issue is, old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your Double Glazed Window Repairs Near Me glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges that are at the fault. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process but it can be easier with someone else to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, causing a gap between the frame and sash. These can be easily repaired by giving them a good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may be misaligned. This happens on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will lessen draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will continue to provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window you should consult a professional immediately.