Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil upvc window repair near me windows and doors regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance, you will need to source some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window repair.

If you plan to attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is large, you may think about a security door that has an integrated window repair near me, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can reach the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. You'll first need to close the window and then perform an experiment fitting. The joints at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window repair near me leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer is applied. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler when you have a person to help hold the frame in place.

Make sure that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to offer advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also be misaligned due to wear, which can cause an opening between the frame and sash. If they're beyond repair, it may be required to realign them. Second, the interlock can be unbalanced. This is located on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will reduce draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be placed on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as possible.