Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a good idea to seal the gap after the glass is removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is substantial, you may prefer a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action immediately if you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also loosen up. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is crucial to act if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs - hyperlink -, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze, it may be hinges at fault. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process but it can be easier if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this shows which way the window should open.

The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. Firstly the hinges, again due to wear and tear could become misaligned. This can cause an opening to appear where the sash joins the frame. If they're beyond repair, it could be necessary to get them re-aligned. In addition, the interlock could also become disaligned. This is located on the hinge's side, and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common cause of draughts is the window repairs near me seals, these are prone to wear or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

One of the most effective ways to reduce draughts is by using an draught excluder. These are typically fabric tubes filled with some sort of filler and can be put on the windowsill on top. They can help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is important to remember that all windows eventually become worn out, and it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it's best to seek professional assistance as soon as you can.