Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double glazed window repairs panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window repair near me watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it can also be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how serious the issue is, old caulking may have to be removed. It is important to remember that when it is about upvc window repair window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the Double Glazed Window Repairs Near Me-glazed glass, it is more likely the issue is with the seal than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease It could be hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier to do if you have someone to help you hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become misaligned due to wear, creating an opening where the sash meets frame. If they are beyond repair, it could be required to realign them. In addition, the interlock could be unbalanced. This happens on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace them.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will provide excellent security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.